The Lab

What we will measure, how, and why. Protocols first, results when they exist.

In one line

The DeskMiles lab has not tested any product yet. These are the protocols we will run, published before the first result.

The five measurements

No product in this category has been tested yet. These slots fill in when real measurements exist.

Pending

Noise at desk height

dB(A)

A-weighted sound level measured at seated/standing ear and desk height while walking at 2 mph, versus room background.

Spec sheets rarely publish noise. Your coworkers on the call will notice before you do.

Read the protocol
Pending

Floor vibration

m/s² RMS

Accelerometer on the floor 1 m away and on the desk top, on a wood-joist floor and on concrete.

Upstairs apartments and shared floors transmit footfall. This is the number neighbours care about.

Read the protocol
Pending

Real belt speed

mph

Optical tachometer on a belt marker at each displayed speed, loaded and unloaded.

Displayed speed and step counts are only as honest as the controller. We will check the gap.

Read the protocol
Pending

Weight-capacity truth

% speed drop

Belt speed at rated load in 25 lb steps using calibrated weights plus a walker, up to the manufacturer rating.

A rating tells you the limit, not how the motor behaves near it.

Read the protocol
Pending

Motor heat

°F rise

Thermocouple on the motor housing over a 60-minute walk at 2.5 mph, on hard floor and on a mat over carpet.

Heat is what wears motors and control boards, and carpet can choke airflow.

Read the protocol